Shop Cable Railing
Filters
10-32 x 1/4” Stainless Steel Half Dog Point Hex Socket Set Screw
These set screws are used as part of the tensioning process. Once the lobed washer and crimp sleeve have been set, the cable end is inserted into t...
View full details5/32" Cobalt Stub Length Drill Bit
This 5/32” drill bit is used for pilot holes when installing Summit Series stair rail brackets.
4-24 x 5/8" Stainless Steel Star Drive Socket Head Cap Screw
Secure Cable Bullet Post Hole Covers with these 4-24 x 5/8” screws.
#25 x 6" Cobalt Aircraft Extension Drill Bit
Use this #25 drill bit to secure Summit Series Level Panels and to install fixed spacer bar standoffs in aluminum or stainless steel handrail.
Post-Mounted Handrail Bracket for Signature Series Cable Railing | Black Finish
Attach post-mounted handrail brackets to the side of Cable Bullet Signature Series railing anywhere an additional grab rail is needed for support o...
View full details#10-32 UNC Carbon Steel Taper Tap
This #10-32 tap is used to clear out threaded set screw holes in Summit Series rail panels.
9/16" Summit Series Support Bar Assembly
Add sleek support to your Summit Series Level or Stair Panels. Attach support bars to the top and bottom rails to provide structural support and ri...
View full detailsSummit Series Stair Template
Use our Summit Series Stair Template to mark accurate holes—this small but mighty tool is a must for installing Summit Series Stair Rail Brackets.
5/32" Allen Wrench
This 5/32” Allen wrench is used to drive in Venture Series Handrail Mounting screws as well as screws to mount Summit Series stair rail brackets.
Summit Series Support Bar Pin
Secure Summit Series Support Bar to top and bottom rails using our support bar pin.
Spacer Bar Standoff with Black Oxide Finish
Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.
5/32 x 3-1/2" Hex Socket Head Power Bit
Use this 5/32" hex socket head power bit to quickly and efficiently advance Venture Series Handrail Mounting Screws.
Signature Series Handrail Hinge for Stair Transitions
Our adjustable Handrail Hinges for Stair Transitions allow you to easily transition your handrail from a level run to a stair run using only simple...
View full detailsSignature Series Handrail Hinge for Stair Corners
Our adjustable Handrail Hinges for Stair Corners allow you to easily transition your handrail down a stair run at an inside corner using only simpl...
View full detailsSignature Series Handrail Hinge for Stair Ends
Our adjustable Handrail Hinges for Stair Ends allow you to easily terminate your stair rail at the top (or bottom) end of your run using only simpl...
View full detailsSignature Series Handrail Hinge for Stair Corners | Black Finish
Our adjustable Handrail Hinges for Stair Corners allow you to easily transition your handrail down a stair run at an inside corner using only simpl...
View full detailsSignature Series Handrail Hinge for Stair Transitions | Black Finish
Our adjustable Handrail Hinges for Stair Transitions allow you to easily transition your handrail from a level run to a stair run using only simple...
View full detailsSignature Series Handrail Hinge for Stair Ends | Black Finish
Our adjustable Handrail Hinges for Stair Ends allow you to easily terminate your stair rail at the end of your run using only simple, straight cuts...
View full details#10-24 x 3/4 Type 23 Self-Tapping Stainless Steel Socket Head Cap Screw | 4-Pack
Secure reinforced aluminum handrail to modern post tops on both terminal posts and line posts with these self-tapping 10-24 x 3/4” screws.
Handrail Drill Guide and Template
Use our Handrail Drill Guide and Template to accurately position and attach post tops when installing handrail. This multi-purpose tool is also a m...
View full details7/32" x 6" Cobalt Aircraft Extension Drill Bit
Use this 7/32” drill bit when installing Signature Series Handrail Hinges for Stair Corners.
1/4-20 UNC Carbon Steel Taper Tap
This #1/4-20 tap is used to tap threaded holes for installing Signature Series Handrail Hinges for Stair Corners.
10-24 x 1/2" Cup Point 316 Stainless Steel Hex Socket Set Screw
These set screws are used to secure splines and Handrail Hinges inside Reinforced Aluminum Handrail.
11/64" x 6" Cobalt Aircraft Extension Drill Bit
Use this 11/64” drill bit when installing Signature Series Handrail Mounting Screws.